Sort by:
Accessories
 |
This is the WINE BOTTLE HOLDER (PROTOTIPO) by AUTOart. Vintage cars and vintage wine have long paired well together in the life of the automotive aficionado. When a bottle of fine red wine comes to your table, often there is sediment on the bottom that is a natural part of the aging process as well as the winemaker s craft. To prevent this sediment from making it into your glass, the bottle mus... [ read more ] |
$48.00
|
 |
This is the 6-speed aluminium gear shift knob basin pump by AUTOart. Made to the actual size of an exotic sports car's gearshift column, this 6-speed basin pump is a practical household item for the kitchen and toilet. It is also an attractive item on the office desk for occasional gear changing practice. The knob and the shaft are made of CNC-machined aluminium billet and the total length is abo... [ read more ] |
$48.00
|
 |
This is the BRAKE CALIPER NAME CARD HOLDER Red by AUTOart. In the old days, brakes were not a part of the vehicle to be shown off as something decorative, such as chromed engine parts or anodized wheels. The brakes, which convert the kinetic energy of the moving vehicle into heat energy through friction, were once just dirty and often rusty cast-iron parts hidden inside the wheel, quietly (or som... [ read more ] |
$35.00
|
 |
This is the Twin-pipe muffler stainless steel herbs grinder by AUTOart. To bring an automotive theme to the dining table, this spice grinder is made in the shape of a twin-pipe muffler. Measuring 135 cm (5.3 ) in height and 80 cm (3.15 ) in width, the muffler body is fabricated from welded stainless steel sheet. The two fully machine-cut stainless steel exhaust pipes placed in the muffler body are... [ read more ] |
$96.00
|
 |
This is the RACING BRAKE DISC KEYCHAIN (W/OMEGA SHAPE KEYRING) Silver by AUTOart. Designed after a performance oriented brake disc found on some higher end luxury and sport cars, this die-cast metal 3 cm (1.2 ) miniature brake disc keychain features a rotor that actually rotates within the brake caliper. The rotor surfaces are fitted with photo-etched stainless steel plates that have been manua... [ read more ] |
$21.95
|
 |
This is the GMP Shop Tool Set #1 in 1:43 scale by GMP. - DIECAST METAL TOOL SET- AUTHENTIC RUBBER LINES |
$19.99
|
 |
SET 4 DRIVERS FIGURES J.Clark, Fangio, Rodriguez & Siffert in 1:43 sca;e by Minichamps |
$49.95
|
 |
Etorre Bugatti wearing 3pc suit aznd overcoat in 1:18 scale by Minichamps |
$49.95
|
 |
Monsieur Ferdinand with tweed blazer late 60's in 1:18 scale |
$49.95
|
 |
Fireman figurine with full suit gloves and helmet and holding a fire extinguisher in 1:18 scale by Minichamps |
$49.95
|
 |
This is the 6-Speed Gear Shift Knob Paper Weight w/Straight Shaft, Zinc Diecast by AUTOart Design. Use it as a paper weight or use it as a clothes hanger or even use it as a door handle. The application is versatile. Made by CNC cut aluminium to the real size of a 6-speed exotic sport car gear shift lever with gear slot. Heavy metal feel with zinc alloy base. Width:8cm (3.15 ) Length:10.5cm (4.13 ... [ read more ] |
$54.95
|
 |
This is the 6-Speed Aluminum Gear Shift Knob Paper Weight/Clothes Hanger w angled Shaft Zinc Diecast by Autoart Design. |
$54.95
|
 |
This is the Suspension Gearshift Knob Umbrella by Autoart. AUTOart umbrella - 65cm (25.6 ) 8-nylon panel This umbrella has a handle incorporating a mini racing style damper with dual spring compression rate. The handle is made of billet cut and machined aluminium. Pressing the aluminium black-coated dome suspended with a mini damper actuates the opening of the umbrella. The tip is CNC machine ... [ read more ] |
$78.00
|
 |
This is a large 5'x8' America flag. lightweight polyester |
$99.95
|
 |
Lamborghini Gallardo Superleggera Wheel Keychain 1:18 Scale by AUTOart |
$19.95
|
 |
The Bugatti Chiron Engine And Gearbox in 1:4 Scale by Amalgam The fastest, most powerful and exclusive production super sports car in Bugatti s history at the time of its launch, the Chiron was revealed at the Geneva Motor Show in March 2016. Master-minded by Achim Anscheidt, every element of the Chiron was designed to be a combination of reminiscence to its history, taking its name from Bugatt... [ read more ] |
$22,995.00
|
 |
Following the shape of a Cosworth DFV F1 racing engine s intake rampipes and made exactly to scale, the cup is made of dual-layer stainless steel that thermally insulates against hot liquid burning the hand. It can be used not only for cold and hot drinks, but also as a pen holder, paper-clip cup or even candy hideaway. The sliding throttle body base holder is cast in aluminum with CNC surface mil... [ read more ] |
$179.95
|
 |
EXTREMELY RARE ITEM! CMC Model Art, CMC Ferrari 250 GTO parts display board, RARE Limited Edition 200 pcs. SOLD OUT at Manufacturer To hang the Ferrari 250 GTO on a wall should be something unthinkable and mind-boggling. But you can do it now -- with this framed display board of the nuts and bolts, metal castings, body parts, assembled units, and semi-finished components - in short, eve... [ read more ] |
$1,999.00
|
 |
CMC Classic Garage Item No. A-015 Limited Edition 200 pcs. Production 2018 CMC Classic Garage CMC presents an easy-to-install kit that is composed of a classic automotive workshop furnis-hed with tools, accessories, and a two-techniician staff, and an Alfa Romeo 6C1750 GS that requires a checkup. The doors of the workshop can open! ... [ read more ] |
$898.00
|
 |
The finest scale model Mercedes-Benz 300 SLR Engine in a Plexiglass Showcase Diecast Model by CMC in 1:18 Scale |
$169.00
|
 |
Pagani Huayra polished aluminum car keychain. Casting aluminum cars in such a small scale (1:87 scale around 2 or 5.1cm) can be challenging when it comes to showcasing the small details of the cars. In order to produce the accurate contour of the car that is true to scale, the car (not including the keychain) is designed with the construction of 19 components despite its small scale. All the w... [ read more ] |
$39.95
|
 |
In honor of Lamborghinis 50th anniversary as the maker of the worlds most outrageous automobiles, AUTOart has produced this exquisite, jewelry-like tribute to the house of the charging bull. Our 1/87th-scale Lamborghini keychain collection, which includes Aventador LP700-4, Reventon, Countach and Miura, is rendered in hand-polished die-cast aluminum, a unique and expensive material for this type o... [ read more ] |
$34.36
|
 |
In honor of Lamborghinis 50th anniversary as the maker of the worlds most outrageous automobiles, AUTOart has produced this exquisite, jewelry-like tribute to the house of the charging bull. Our 1/87th-scale Lamborghini keychain collection, which includes Aventador LP700-4, Reventon, Countach and Miura, is rendered in hand-polished die-cast aluminum, a unique and expensive material for this type o... [ read more ] |
$34.36
|
 |
Army WLA w/o Sidecar Collector Folding Knife When the world went to war, Harley-Davidson heard the call and created the rugged and reliable WLA. This durable bike was the perfect workhorse to carry our fighting forces on countless missions in war-torn Europe. Now The Franklin Mint in association with Harley-Davidson presents a unique collector knife that celebrates this historic motorcycle. The dr... [ read more ] |
MSRP: $60.50
$45.65
Save 25%
|
[cancel]